
Residual heat indicator
Warning!
The risk of burns from residual heat!
Daily use
Warning! Refer to the Safety chapters.
Activation and deactivation
Touch
for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
•
All cooking zones are deactivated (
).
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). An acoustic signal sound some time and the
appliance deactivates. Remove the object or clean
the control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time
comes on and the
appliance deactivates. See below.
• The relation between heat setting and times of the
Automatic Switch Off function:
•
, - — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The heat setting
Touch
to increase the heat setting. Touch to de-
crease the heat setting. The display shows the heat set-
ting. Touch and at the same time to deactivate
the cooking zone.
The Child Safety Device
This function prevents an accidental operation of the ap-
pliance.
To activate The Child Safety Device
•
Activate the appliance with
. Do not set the heat
settings.
•
Touch
of the two front cooking zones for 4 sec-
onds. The symbol
comes on.
•
Deactivate the appliance with
.
To deactivate The Child Safety Device
•
Activate the appliance with
. Do not set the heat
settings. Touch
of the two front cooking zones
for 4 seconds. The symbol
comes on.
•
Deactivate the appliance with
.
To override The Child Safety Device for only one
cooking time
•
Activate the appliance with
. The symbol
comes on.
•
Touch
of the two front cooking zones for 4 sec-
onds. Set the heat setting in 10 seconds. You can
operate the appliance.
•
When you deactivate the appliance with
, The
Child Safety Device operates again.
Helpful hints and tips
Cookware
Information about the cookware
• The bottom of the cookware must be as thick and flat
as possible.
• Cookware made of enamelled steel and with alumini-
um or copper bottoms can cause the colour change
on the glass-ceramic surface.
Energy saving
How to save energy
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
• Stop the cooking zones before the end of the cooking
time to use residual heat.
16
Komentáře k této Příručce